62
206-4218
(Continued from previous page)
If applicable, you can also press Enter at each prompt to accept the default value in
square brackets.
Enter new year [2014]>
Enter new month [01]>
Enter new day [08]>
4. At each of the following prompts, type the hour and minute, respectively. Note that the
hour should be entered in 24-hour format. Press Enter after each entry.
If applicable, you can also press Enter at each prompt to accept the default value in
square brackets.
Enter new hour [18]>
Enter new minute [49]>
5. The system will display the new time and then prompt for conrmation, for example:
New time: 2014-01-08 18:53:00
Apply? [y/n]
Either, type y and press Enter to apply the new conguration to the system, or type n
and press Enter to return to the
Setup Command >
prompt without changing the time
conguration.
If you do apply new manual conguration, the system will display conrmation, for example:
New time is set
Change the Login Password
For security purposes, it is recommended that the admin user login password be unique to
the system. Note that the login password is case-sensitive.
1. At the
Setup Command >
prompt, type pwd and press Enter.
The system prompts for the current admin user password:
Changing password for admin
Old password:
2. Type the current password and press Enter. The system will then prompt you to type and
retype the new password:
New password:
Retype password:
3. Type and then retype the new password at the prompts. Press Enter after each entry.
Once you complete the Password elds successfully, the system displays conrmation:
Password for admin changed by admin.
Conguration Options via Command Line (Cont.)
