40 Rockwell Automation Publication 1412-UM001D-EN-P - September 2012
Chapter 3 Display Modes
This display shows the transient selected in Opening Previously Stored
Tr a n si e n t s on page 39.
The screen displays four cycles of 256 points/cycle, with one cycle before the
trigger and three cycles after.
The waveforms to be displayed are selected by pressing on the Up/Down
Cursor buttons.
– 3V displays the three phase voltages during the transient
– 4A displays the three phase currents and the neutral current during the
transient
– L1, L2 or L3 displays the current and voltage on phase 1, 2, or 3
Instant values at an instant t, in relation to the cursor, can be displayed on
the time scale with the Left/Right Cursor buttons.
The Arrow button returns to the transient selection screen and the
Plus and Minus buttons change the time scale (screen display of 4, 2,
or 1 periods; zoom in and zoom out) centered on the cursor, which can be
moved with the Left/Right Cursor buttons.
All transients captured and stored can be downloaded to a computer
with the DATAVIEW software
See Chapter 4 for more information about the DATAVIEW software.
07/25/02 11:22
07/25/02 11:24:21
100
%
1
2
3
<t= +0.0ms I1= IN=-1 12= -2+0 I3= -20 >
30A
0
-30A
3V
4A
L1
L2
L3
