48 Rockwell Automation Publication 1412-UM001D-EN-P - September 2012
Chapter 3 Display Modes
Open a Previously Saved
Snapshot
A short press (about 1 s) on the Camera button gives access to the menu of
snapshots that have been saved.
The small icon to the left of each snapshot (date and time) tells you what type of
data was stored.
• Use the Up/Down Cursor buttons to select the snapshot.
• To display the snapshot, press the Open Folder button , then Enter.
• After reviewing the snapshot, press Enter again to return to the list of saved
snapshots.
• To delete a selected snapshot, press the Trash Can button , then press
Enter.
Print
The Print button lets you print a screen directly to a dedicated printer
connected to the serial port.
When the Print button is pressed, the screen freezes, and the top left mode
icon is replaced by the Print icon .
The various storage spaces of the PowerPad unit are of a fixed size and are
completely independent. There are four memory spaces available (alarms,
snapshot, transients and recordings).
07/25/02 10:26 100
%
07/17/02 11:27
07/17/02 11:28
07/17/02 12:57
07/17/02 12:08
07/17/02 12:20
07/17/02 12:30
07/17/02 12:48
It will take a few seconds for the icon to appear. Print transmission speed is
19.2 kb.
300V
RMS
0
-300
<t= 5.0ms V1= +276 V2= -140V3= -145>
3U
3V
3A
L1
L2
L3
THDCF
max
min
202.5 v202.0 v202.7 v
07/25/0259.99Hz 10:26 100
%
1
23
