A SERVICE OF

logo

Page 16 - 64 Xerox Document Centre System Administration Guide
Microsoft Networking
1. Open your Web browser and enter the TCP/IP address of the
Document Centre in the Address or Location field.
2. Click the Properties tab or click Properties in the directory
tree.
3. Select Connectivity, then select Protocols in the directory
tree.
4. Select Microsoft Networking in the directory tree.
5. Select Protocol Enabled to enable Microsoft Networking.
6. Select Ethernet or Token Ring from the Physical Connection
drop-down list.
NOTE
Physical Connection is read only if Transport is NetBIOS/IP.
7. Select TC/PIP or NetBIOS/NetBEUI from the Transport
drop-down list.
NOTE
Transport is NetBEUI if TCP/IP is not enabled.