Page 6 - 4 Xerox Document Centre System Administration Guide
6. Set the Print Server Name and Password.
a) Press the Print Server button.
b) Press the Print Server Name button and use the touch
panel keyboard to enter the name you assigned to your
print server (it is recommended you use all UPPER
CASE characters). A default name will appear. Use the
backspace key (it looks like an arrow pointing to the left)
to clear out the default name prior to entering your new
name. When finished press Save to retain the changes
and return to the Print Server screen.
c) Press the Print Server Password button and use the
Touch Screen keyboard to enter the print server pass-
word you recorded when you set up your print server
and press Save.
d) Press Save to exit the Print Server screen and save your
changes.
e) To change the desired SAP rate or its Poll Interval for
your printer, press the Rates button.
f) Press the box under SAP Rate or Poll Interval and enter
the desired number from the keypad. The default values
are recommended. When finished, press Save to retain
your changes and return to the NetWare Options screen.
