ES-2048 User’s Guide
Chapter 13 Broadcast Storm Control 119
* Settings in this row apply to all ports.
Use this row only if you want to make some settings the same for all ports. Use this
row first to set the common settings and then make adjustments on a port-by-port
basis.
Note: Changes in this row are copied to all the ports as soon as you
make them.
Broadcast (pkt/s) Select this option and specify how many broadcast packets the port receives per
second.
Multicast (pkt/s) Select this option and specify how many multicast packets the port receives per
second.
DLF (pkt/s) Select this option and specify how many destination lookup failure (DLF) packets the
port receives per second.
Apply Click Apply to save your changes to the switch’s run-time memory. The switch loses
these changes if it is turned off or loses power, so use the Save link on the top
navigation panel to save your changes to the non-volatile memory when you are
done configuring.
Cancel Click Cancel to reset the fields.
Table 27 Broadcast Storm Control (continued)
LABEL DESCRIPTION
