ES-2048 User’s Guide
Chapter 4 The Web Configurator 51
IP Setup This link takes you to a screen where you can configure the management IP
address, subnet mask (necessary for switch management) and DNS (domain name
server).
Port Setup This link takes you to screens where you can configure settings for individual switch
ports.
Advanced
Application
VLAN This link takes you to screens where you can configure port-based or 802.1Q VLAN
(depending on what you configured in the Switch Setup menu). You can also
configure protocol-based VLANs.
Static MAC
Forwarding
This link takes you to screens where you can configure static MAC addresses for a
port. These static MAC addresses do not age out.
Filtering This link takes you to a screen to set up filtering rules.
Spanning Tree
Protocol
This link takes you to screens where you can configure the STP/RSTP to prevent
network loops.
Bandwidth
Control
This link takes you to screens where you can cap the maximum incoming bandwidth
allowed on specified port(s).
Broadcast Storm
Control
This link takes you to a screen to set up broadcast filters.
Mirroring This link takes you to screens where you can copy traffic from one port or ports to
another port in order that you can examine the traffic from the first port without
interference
Link Aggregation This link takes you to a screen where you can logically aggregate physical links to
form one logical, higher-bandwidth link.
Port
Authentication
This link takes you to a screen where you can configure RADIUS (Remote
Authentication Dial-In User Service), a protocol for user authentication that allows
you to use an external server to validate an unlimited number of users.
Port Security This link takes you to a screen where you can activate maximum port security
through the use of configured static MAC addresses.
Queuing Method This link takes you to a screen where you can configure strictly priority or weighted
fair scheduling with associated queue weights for each port.
Multicast This link takes you to a screen where you can configure various multicast features
and create multicast VLANs.
DHCP Relay This link takes you to a screen where you can configure DHCP relay information
and specify the DHCP server(s).
Routing Protocol
Static Routing This link takes you to screens where you can configure static routes. A static route
defines how the switch should forward traffic by configuring the TCP/IP parameters
manually.
DiffServ This link takes you to screens where you can configure DiffServ and DSCP settings.
Management
Maintenance This link takes you to screens where you can perform firmware and configuration
file maintenance as well as reboot the system.
Access Control This link takes you to screens where you can change the system login password
and configure SNMP and remote management.
Diagnostic This link takes you to screens where you can view system logs and test port(s).
Table 5 Navigation Panel Links (continued)
LINK DESCRIPTION
