ES-2048 User’s Guide
228 Chapter 31 Introducing Commands
unknown-
multicast-frame
<drop|flooding>
Sets how to treat traffic from
unknown multicast group.
13
reserved-
multicast-group
<drop|flooding>
Sets how to treat traffic belonging
to reserved multicast groups.
13
igmp-
filtering
Enables IGMP filtering on the
switch.
13
profile <name>
start-address
<ip> end-address
<ip>
Sets the range of multicast
address(es) in a profile.
13
interface port-channel
<port-list>
Enables a port or a list of ports for
configuration. See Section
31.11.4 on page 233 for more
details.
13
spq
Sets the queuing method to SPQ
(Strictly Priority Queuing).
13
wfq
Sets the queuing method to WFQ
(Weighted Fair Queuing).
13
wrr
Sets the queuing method to WRR
(Weighted Round Robin).
13
fe-spq
<q0|q1|..|
q7>
Sets the switch to use SPQ to
service the subsequent queue(s)
after and including the specified
queue for the 10/100 Mbps
Ethernet ports.
13
ip route <ip> <mask>
<next-hop-ip>
Creates a static route. 13
<ip> <mask>
<next-hop-ip>
[metric
<metric>]
[name <name>]
[inactive]
Sets the metric of a static route or
deactivates a static route.
13
name-server <ip>
Sets the IP address of a domain
name server.
13
address default-
gateway
<ip>
Sets the default gateway's IP
address for the out-of-band
management port.
13
address <ip> <mask>
Sets the IP address and subnet
mask of the out-of-band
management port.
13
mac-
forward
name <name> mac
<mac-addr> vlan
<vlan-id>
interface
<interface-id>
Configures a static MAC address
forwarding rule.
13
Table 73 Command Summary: Configuration Mode (continued)
COMMAND DESCRIPTION PRIVILEGE
