ES-2048 User’s Guide
232 Chapter 31 Introducing Commands
[contact <system
contact>]
[location
<system
location>]
Sets the geographic location and
the name of the person in charge
of this switch.
13
logins username <name>
password <pwd>
Configures a default (read-only)
account.
14
username <name> privilege <0-
14>
Assigns a privilege level to user
accounts.
14
service-
control
icmp
Allows ICMP access for services
such as Ping.
13
snmp
Allows SNMP management. 13
http <socket-
number>
<timeout>
Allows HTTP access on the
specified service port and defines
the timeout period.
13
telnet <socket-
number>
Allows Telnet access on the
specified service port.
13
ftp <socket-
number>
Allows FTP access on the
specified service port.
13
ssh <socket-
number>
Allows SSH access on the
specified service port.
13
https <socket-
number>
Allows HTTPS access on the
specified service port.
13
remote-
management
<index>
Enables a specified secured
client set.
13
<index> start-
addr <ip> end-
addr <ip> service
<[telnet] [ftp]
[http] [icmp]
[snmp] [ssh]
[https]>
Specifies a group of trusted
computer(s) from which an
administrator may use a service
to manage the switch.
13
admin-
password
<pw-string>
<confirm-string>
Changes the administrator
password.
14
syslog
Enables syslog logging on the
switch.
13
server <ip-
address>
inactive
Disables syslog logging to the
specified syslog server.
13
level [0 ~ 7]
Sets the IP address of the syslog
server and the severity level.
13
type <type>
facility [local 1
..7]
Sets the log type and the file
location on the syslog server.
13
default-
management
<in-band|out-of-
band>
Specifies through which traffic
flow the switch is to send packets.
13
Table 73 Command Summary: Configuration Mode (continued)
COMMAND DESCRIPTION PRIVILEGE
