Filter
Top Products
• GPRS Settings: This menu allows you to set the GPRS
network proxy by inputting the following information.
• Gateway/Proxy: If you set the Connection Type to
WAP, Gateway is displayed. If you set it to HTTP,
Proxy is displayed. Press the [
o
] key to display the
subfunctions such as IP Address and IP Port, then input
the appropriate information for each of the following
subfunctions, inputting the information provided by your
service provider.
• Access Point: Press the [
o
] key to input the
appropriate Access Point.
• Login ID: Press the [
o
] key to input the appropriate
login ID.
• Password: Press the [
o
] key to input the appropriate
password.
• DNS Settings: Input the appropriate IP address for the
Domain Name Server. You can input the primary and
secondary DNS.
• Bearer: Select the bearer type for each type of network
access. Press the Left or Right scroll key to select GSM
Only or GPRS Only.
• Reset Profile: Press the [
o
] key to reset the settings of
the selected profile. Press the Left or Right scroll key to
select Yes or No.
Cache
This function sets up your phone’s cache.
This feature is used to store WAP pages directly on your
phone, so they display rapidly when you return to them.
Cache Mode
This function sets up the cache memory check, which
verifies whether the WAP page’s information is already
stored in your phone’s cache memory.
❶ Press the [Menu] Soft key, select 4.MEdia Net, select
5.Cache, and then select 1.Cache Mode.
❷ Select one of the following options.
• Always Check: The cache is always checked whenever a
URL is loaded.
• Never Check: The cache is never checked.
Clear Cache
This function clears all data stored in the cache (recently
visited WAP pages).
Press the [Menu] Soft key, select 4.MEdia Net, select
MEdia Net
60
NOTE
This function is available only when your Connection Type
is set to HTTP.
070210_C3B_EN_at&t_(00)�‚�¬.indd 60 2007.2.10 12:39:45 PM