Audiovox PPC 5050 Cell Phone User Manual


 
Avoid hot areas: The product should be placed away from heat sources such as radiators, heat registers, stoves,
or other products (including amplifiers) that produce heat.
Avoid wet areas: Never use the product in a wet location.
Avoid pushing objects into product: Never push objects of any kind into cabinet slots or other openings in the
product. Slots and openings are provided for ventilation. These openings must not be blocked or covered.
Mounting Accessories: Do not use the product on an unstable table, cart, stand, tripod, or bracket. Any mounting
of the product should follow the manufacturer’s instructions, and should use a mounting accessory recommended
by the manufacturer.
Avoid unstable mounting: Do not place the product with an unstable base.
Use product with approved equipment: This product should be used only with personal computers and options
identified as suitable for use with your equipment.
Adjust the volume: Turn down the volume before using headphones or other audio devices.
Cleaning: Unplug the product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.
Use a damp cloth for cleaning, but NEVER use water to clean an LCD screen.
Safety Precautions for Power Supply Unit
Use the correct external power source: A product should be operated only from the type of power source
indicated on the electrical ratings label. If you are not sure of the type of power source required, consult your
authorized service provider or local power company. For a product that operates from battery power or other
sources, refer to the operating instructions that are included with the product. Handle battery packs carefully:
This product contains a Lithium Polymer battery. There is a risk of fire and burns if the battery pack is handled
improperly. Do not attempt to open or service the battery pack. Do not disassemble, crush, puncture, short external
contacts or circuits, dispose of in fire or water, or expose a battery pack to temperatures higher than 60°C (140°F).
DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED.
REPLACE ONLY WITH SPECIFIED BATTERIES. DISPOSE OF USED
BATTERIES ACCORDING TO THE LOCAL REGULATIONS OR
REFERENCE GUIDE SUPPLIED WITH YOUR PRODUCT.
Appendix D: Hardware Specifications
Feature Component
PDA module: Processor
Memory
Intel Cotulla Processor 400MHz CPU
SDRAM 32MB; Flash ROM: 32MB
Radio CDMA EVDO backwards compatible to 1xRTT
LCD module 3.5” 240x320 pixels, 65K colors transflective TFT.
Buttons Four buttons (2 CDMA and 2 Windows CE AP buttons -
programmable); power and back light control; navigation pad for
scroll up, down, left, right and action; volume adjustment button.
Stylus 101 mm, maximum diameter 4.5 mm
Notification One LED or Vibration motor for CDMA, and PDA for event/standby
alarm, charging.
Audio Built in Microphone and speaker; one earphone/ microphone jack
with stereo sound; MP3 stereo
Interface Feature connector (RS-232, USB and DC power); infrared IrDA SIR.
Power Rechargeable battery Li-Polymer; 3.7V 1500 mAh; built in charger.
Accessories AC adapter (input: 100-240Vac, 50-60Hz, 0.2A; output: 5VDC, 1A
Max, 5W)
USB cradle; earphone plug; service kit; protective pouch.
110