Filter
Top Products
Sending and Receiving Fax and Data Calls 81
Sending and Receiving
Fax and Data Calls
Note! To be able to use various communications services you need the
appropriate software such as a fax program, an e-mail program or an
Internet browser.
All fax and data calls are initiated from the appropriate computer software.
To send fax and data calls you need to connect your phone to a computer,
for example by means of an infrared modem and then start the appropriate
software program.
The procedure of receiving fax and data calls depends on your network and
subscription. If you have different numbers for voice, fax anddata calls, this is
referred to as multi numbering. This means that you can have up to three
numbers in your subscription. If you only have one number for all call types,
this is referred to as single numbering.
Receiving Fax and Data Calls – Multi Numbering
If your network and subscription support multi numbering, the type of
incoming call is shown in the display. There are two possible calls apart from
voice calls:
• Fax calls
• Data calls
The display shows the type of call.
Toreceiveafaxordatacall
1. Connect your computer to the phone.
2. Answer the call from within the software program (if it does not answer
automatically).
Note! You cannot answer an incoming fax or data call by pressing the
YES
key on the phone but you may reject the call by pressing NO.
Sending Fax and Data Calls
Receiving Fax and Data Calls