Filter
Top Products
Accessories 95
Basic Handsfree
Basic Handsfree means that the phone handles the call in semi-duplex mode.
This means that you cannot speak at the same time as the person at the
other end of the line. Use this alternative only if Full Handsfree does not
work properly.
Full Handsfree
Full Handsfree means that the phone handles the call in full duplex mode.
This considerably increases the quality of speech, since you do not have to
wait until it is your turn to speak.
For Full Handsfree to work properly, your phone adapts to the sound
environment around the handsfree equipment. This adaptation might take a
few calls. During this learning phase, the person you are talking to might hear
an echo of his or her own voice (because the sound goes from the speaker into
the microphone again). However, this disappears as the other person speaks.
If the echo lasts longer than the first few calls, try Basic Handsfree instead.
Tip! Set the handsfree type to Full Handsfree first. If speech quality is poor,
set the Basic Handsfree type instead.
To set the handsfree type
1. Scroll to
Settings
, YES,
Handsfree
, YES,
Handsfree Type
, YES.
2. Selectthetypeyouwant.
When using a Portable or Vehicle Handsfree unit, you may choose to answer
incoming calls with Any Key or Auto answering.
• Any Key: Ifyou usethe phone with handsfree equipment andthis function
isturnedon,youcanansweranincomingcallbypressinganykey,except
the
NO key.
• Auto answering: If you choose the automatic answering mode, an
incoming call is answered automatically after one ring signal, if the phone
is used with handsfree equipment.
To set an answering mode
1. Scroll to
Settings
, YES,
Handsfree
, YES,
Answering Mode
, YES.
2. Select a mode.
If you choose the Normal alternative, you have to answer calls as normal.
Tip! You can also answer calls by using the Voice Answer function.
See“VoiceAnswering”onpage78.
Answering Mode