Kyocera K-7 Cell Phone User Manual


 
36 Using Voice Recognition
when you hear the correct name. Say “No when
you hear an incorrect name.
5. When you are finished, press . You cannot
end the call with a voice command.
Using voice features with
accessories
Some of the following features can only be used with
accessories, such as a hands-free car kit or hands-free
headset, which are sold separately. Accessories for
your K-7 Rave phone can be found at
www.virginmobileusa.com or
www.kyocera-wireless.com/store.
Waking up the phone
If your phone is connected to a hands-free headset,
you can use use a voice command to activate the
phone to make a phone call.
Voice Wake-up does not work with Keyguard active.
To activate the Voice Wake-up setting:
1. Select Menu Settings Voice Services
Voice Wake-Up With ext. pwr.
2. Select Menu Settings Keyguard
Disabled, then press .
To wake up the phone:
3. Say “Wake Up” and listen for a tone.
4. Say “Wake Up” again until you hear two tones.
If the phone does not recognize your “Wake up”
command, see “Training voice recognition” on
page 37.
Answering the phone
You can set the hands-free car kit to either (1) answer
automatically or (2) ring until you press a key or
answer using a voice command.
Answering automatically
To set it to answer automatically:
•Select
Menu Settings Accessories
Auto-Answer After 5 secs.
Answering using voice commands
If Auto-Answer is turned off, you can use a voice
command to answer an incoming call using the hands-
free car kit or hands-free headset.
To turn off Auto-Answer:
•Select
Menu Settings Accessories
Auto-Answer Disabled.