Lennox Hearth X-TC Cell Phone User Manual


 
User Guide 47
11 Pictures
Camera Tips
Your phone comes with a camera. Before using
your phone’s camera, here are some tips:
You cannot activate the camera while on
an active call or while browsing files in the
media gallery.
Once the camera is active, the main screen
acts as the viewfinder.
If you get a “Low memory” error, check your
resolution and quality compression settings.
If there is no activity within 45 seconds after
you turn your camera on, the camera quits
and returns to the previous launch point.
Menu settings and options can only be
accessed when the camera is active.
Numbers in the top right corner indicate the
number of snapshots remaining before the
phone runs out of memory.
Take a Picture
1. To activate the camera, press and hold the
Camera key. You can also select Pictures >
Take a picture from the main menu.
2. Focus on the image using the phone’s
display as a viewfinder.
3. Press the OK key to take a picture (saved
to
My pictures).
4. Select Send to create a multimedia
message or
Erase to delete the picture
from your phone.
5. Press the End key to exit camera mode.
Go to My pictures
From Pictures, select My pictures to view all of
the pictures you have taken and saved.
Camera Setting Options
Adjust the Resolution
From camera mode, select Options > Settings >
Resolution and a size for your pictures.
Numbers in the bottom left corner indicate the
current resolution setting.
Set Self Timer
From camera mode, select Options > Settings >
Self timer and a time.
The icon indicates the timer is
activated. When you take a picture, a beep
plays three seconds from the time the shutter
snaps the picture.
82-R5601-1EN.book Page 47 Tuesday, June 16, 2009 12:47 PM