Filter
Top Products
User Guide 65
Set Expert Mode
Use Expert mode to speak a command after
you hear a tone instead of following the initial
voice prompts.
From
Expert mode, select one of the following:
•Normal sets the phone to default
voice prompts.
•Expert sets the phone to sound tones
instead of voice prompts.
Set Display Results
You can set the phone to display up to three voice
recognition contacts when calling or searching
for a contact with voice commands.
From
Display results, select Single best or
Three best.
Set Digit Lengths
You can set the number of digits used for a phone
number in your voice dial list.
From
Digit lengths, select one of the
following options:
• North american recognizes only 7, 10, and
1 + 10 digits in a phone number.
• Permit all allows 4-14 digits in a
phone number.
Voice answer
Enable Voice Answer
You can set your phone to answer a call with your
voice when using a hands-free accessory.
1. From Auto answer, select Disabled.
2. From Headset sound, select
Outofheadset.
3. From Voice answer, select With accessory.
Answer Using Voice Answer
When you receive an incoming call, the phone
prompts “Incoming call, answer?”. With the caller
recognized as a contact entry in your phone, the
phone prompts “Incoming call from (Name),
answer?” Do one of the following:
• Say “Yes” or press any except the End key to
answer the call.
• Say “No” or press the End key to
ignore the call.
• Remain silent. The voice alert repeats twice
and the phone rings once before returning to
the main screen.
Use Voice Training
If your phone has trouble recognizing your voice,
you can train your phone to recognize specifically
your voice for numbers.
1. From Voice training, read the message and
select
OK > Train numbers > OK.
2. Follow the prompts for each number until
training is complete.
Note: You must read the numbers digit by digit for
voice training to work.
82-R5601-1EN.book Page 65 Tuesday, June 16, 2009 12:47 PM