Filter
Top Products
Getting Started
3. Getting Started
QUICK START
If you have a fully charged battery and a miniature SIM card
at hand, to get the phone ready for use quickly do as follows:
Remove the battery. (See The SIM Card in this chapter.)
Install the SIM card. (See The SIM Card.)
Install the battery. (See The SIM Card.)
Switch on the phone by pressing and holding the
for a second. A tone is heard and the phone backlight will
come on.
key
If the phone requests the PIN code (delivered with the
SIM card), key it in and press the left selection key.
Check that the signal strength indicator (and the bar above
it) and the operator’s name are shown. Pull the antenna
fully out for better reception.
Now the phone is ready for your first call:
You can clear the display by pressing and holding the
C
key.
Key in the area code and phone number of the per-
son you wish to call.
Press
_
to dial the number.
Wait for the answer, then speak.
After you have finished your conversation, press
_
to end the call.
If the texts on the display are not shown in English, do as
follows:
You can clear the display by pressing and holding the
C key.
Press the left selection key.
14