Filter
Top Products
Menu Functions
With the message on the display, you may press a number
key and then perform any memory or menu operation in the
normal way, e.g. make or receive a call. When you delete all
characters from the display (by pressing and holding the
C
key), the message will be shown again.
COUNTDOWN TIMER (Menu 9 2)
The phone can be programmed to alarm after a specified
period of time.
The time will stay in effect only as long as the phone remains
switched on. When the phone is switched off or the battery
runs out of power, the clock is reset and you have to re-pro-
gram it.
~
Press
Menu 9 2
to enter this function.
@
At the prompt Set timer:, key in the time after which the
alarm will be issued. For example, 02h 30min sets the
phone to alarm after 2 hours and 30 minutes.
~
Press the
OK
selection key.
Once the given time expires, the phone will play a repeating
ringing tone and the message COUNTDOWN TIME UP will
blink on the display. Press the
OK
selection key to stop the
alarm.
If you want to stop the timer before the defined time has ex-
pired, enter the function and turn off the timer by keying in a
zero (0) four times and pressing the
OK
selection key.
Note:
When you have switched the ringing tone off in Menu
12, it will not be heard. When either of the vibration options
(RING AND VIBRATE or VIBRATE) has been selected in
Menu 12, the phone will also vibrate after the defined time.
The vibrating option is available only with a special battery.