Filter
Top Products
Menu Functions
selection key. If no phone number is displayed, key it in
now and press the OK selection key.
The phone calls the network operator and asks it to acti-
vate the selected divert mode (REQUESTING... ). After
receiving a response, the phone will end the call auto-
matically, and the message DIVERT ACTIVE will appear.
●
If you selected Cancel in step 4, the selected divert
mode is set off. The phone calls the network operator
and requests that the selected divert mode be set off.
The message DIVERT CANCELLED will appear.
●
If you selected Status in step 4, the phone will indicate
the call types (e.g. voice call, data call, fax call) to which
the currently selected divert mode applies or can be
applied.
With the text View list on the display, use or
select the required call type.
to
Next, press the
Detail
selection key, Two further
options, To number and Delay, will appear.
The To number option shows the phone number to
which the calls are currently diverted.
The Delay option can be used only when you have
selected the mode Divert When Not Answered. This
option indicates the period of time within which your
incoming calls, if left answered, are diverted.
Move the pointer with or to either option and
press the
OK selection key.
The phone number and the delay time will remain on
the display for awhile so that you can check and write
them down.
You can modify the phone number in this menu or by
using a manual command string. The delay time can be
63