Filter
Top Products
Sending DTMF Tones
sequence together, for instance. To link two locations (only in
phone memory):
Key in or recall from memory the phone number (e.g. 123
456) that you want to link with a DTMF sequence.
Press the
*
key twice quickly. This adds a + character to
the end of the phone number.
Key in the memory location where you will store the
DTMF sequence.
For example, if the DTMF sequence is to be stored in lo-
cation 33, the display should read 123456+33.
●
If you use different DTMF sequences in combination
with the same phone number, you can skip this step.
(If there is no location number after the+ character, the
phone will prompt for it.)
Store the phone number including the + character (and,
optionally, the location of DTMF digits) into memory.
Key in and store the DTMF digit sequence in the given
location (location 33 in this case).
●
You can skip this step if you have not stored a location
number after the + character in step 3.
send a linked sequence:
Key in the number of the memory location where the first
part of the linked sequence is stored,
Press
P.
If you have not specified a location number after the+
character, the phone will ask for it after the call has been
connected. At the prompt Location number:, key in the
location and press the
Find
selection key.
95