Filter
Top Products
Settings
45
Since devices with Bluetooth connectivity communicate using radio waves, your
phone and the other device do not need to be in direct line-of-sight.
The two devices only need to be within a maximum of 30 feet (10 meters) of each
other. The connection can be subject to interference from obstructions such as
walls or other electronic devices.
The Bluetooth wireless technology application whether used actively or in the
background, consumes the battery and reduces the operating time of the phone.
This device is compliant with Bluetooth Specification 1.2 and supports the
following profiles:
• Object push profile (OPP)
• File transfer profile (FTP)
• Dial-up networking profile (DUN)
• Generic object exchange profile (GOEP)
• Headset profile (HSP)
• Hands-free profile (HFP)
• Generic access profile (GAP)
• Service Discovery Protocol (SDP)
• Serial port profile (SPP)
To ensure interoperability between other devices supporting Bluetooth technology,
use only enhancements approved by Nokia for this model. Check with the
manufacturers of other devices to determine their compatibility with this device.
There may be restrictions on using Bluetooth technology in some locations. Check
with your local authorities or service provider. If you want more information on
this function, visit the Bluetooth Technology organization website:
https://www.bluetooth.org/
.
Pairing
You can set up a permanent association (pairing) between your phone and another
device with Bluetooth technology. Some devices may require pairing before data
transfer can take place.
To pair with a device, you and the owner of the other device must agree on a pass
code of 1–16 numeric characters. The first time you try to connect the devices,
you must each enter the same pass code. Once the devices are paired, you will
not need to use the pass code again, so there is no need to remember it.
Paired devices are placed in your paired device list. You can view the list even
when Bluetooth connectivity is not active or when the devices in the list are not
available for connection.