Filter
Top Products
Settings
50
If you use the Auto-update of date & time option while outside your digital network,
you may be prompted to enter the time manually. Network time will replace the
time and date when you reenter your digital network.
You may may be prompted to enter the time manually, if the battery is removed or
discharged while you are outside the digital network and the battery is installed
or recharged while you are still outside of the digital network.
■ Call
Location info sharing
Location info sharing sets whether your GPS location is always reported or reported
only during an emergency call.
In the standby mode, select Menu > Settings > Call > Location info sharing > 911
only or Location on.
GPS should not be used for precise location measurement, and you should never
rely solely on location data from the GPS receiver.
This feature is not designed to support positioning requests for related calls.
Contact your service provider for more information about how your phone complies
with government regulations on location based emergency calling services.
Anykey answer
When Anykey answer is on, briefly press any key except the right selection or end
key to answer a call. In the standby mode, select Menu > Settings > Call >
Anykey answer > On or Off.
Automatic redial
Occasionally, your network may experience heavy traffic, resulting in a fast busy
signal when you dial. With automatic redial activated, your phone redials the
number, and notifies you once the network is available.
In the standby mode, select Menu > Settings > Call > Automatic redial > On or Off.
1-touch dialing
To activate or deactivate 1-touch dialing, in the standby mode, select Menu >
Settings > Call > 1-touch dialing > On or Off. For more information on 1-touch
dialing, see "Set up 1-touch dialing," p. 38.
Answer when fold is opened
Set your phone to answer a call when you open the fold. If the setting is off, you
must press the call key after you open the fold. In the standby mode, select
Menu > Settings > Call > Answer when fold is opened > On or Off.