Copyright © 2004 Nokia. All rights reserved.
22
6. To replace the back cover:
Place the top of the back cover over the top of
the phone (10). Press the bottom of the back
cover towards the phone until the cover is
locked into place (11).
■ Changing the covers
Before changing the cover, always switch off the power and disconnect the phone from the
charger or any other device. Avoid touching electronic components while changing the
covers. Always store and use the phone with the covers attached.
The phone is supplied with some cut-out covers made and approved by Nokia that
you can use to quickly change the look of your phone. You can also make the
covers by yourself.
Note: Use only normal, plain paper used in standard printers (whose
weight is 60-135 g/m
2
) that is not thicker than 0.3 mm. Colors or ink
used in the paper must not contain metal particles.
1. Remove the back cover as described on page 20.
2. To remove the front cover, gently pull the top of
the cover from the phone (1) and lift the cover.
3. Remove the old cut-out cover from the back cover
and the old cut-out cover and keymat from the
front cover.