Filter
Top Products
Tools
72
Access point name (for packet data only) — The access point name is
needed to establish a connection to the GPRS network.
Dial-up number (for data call only) — the modem telephone number of
the access point
User name — The user name may be needed to make a data connection,
and is usually provided by the service provider. The user name is often
case-sensitive.
Prompt password — If you must enter a new password every time you
log onto a server, or if you do not want to save your password to the
phone, select Yes.
Password — A password may be needed to make a data connection, and
is usually provided by the service provider. The password is often
case-sensitive.
Authentication — Normal or Secure
Homepage — Depending on whether you are setting up an Internet
access point or MMS access point, enter the Web address or the address
of the multimedia messaging center.
Data call type (for data call only) — defines whether the phone uses an
analog or digital connection. For details, contact your ISP.
Max. data speed (for data call only) — This option allows you to limit the
maximum connection speed when a data call connection is used. During
the connection, the operating speed may be less, depending on network
conditions.
Select Options > Advanced settings to change the following options:
Network type (for packet data only) — the Internet protocol (IP) version
of the network: IPv4 or IPv6. The other settings depend on the selected
network type.
IPv4 settings and IPv6 settings (for data call only) — the Internet
protocol settings. The settings depend on the network type.
Phone IP address (for IPv4) — to enter the IP address of your phone
DNS address — to enter the IP address of the primary and secondary DNS
servers