Filter
Top Products
Tools
73
Proxy serv. address — to enter the IP address of the proxy server
Proxy port number — to enter the port number of the proxy server
The following settings are shown if you have selected data call as the
connection type:
Use callback > Yes — to allow a server to call you back once you have
made the initial call. Contact your service provider to subscribe to this
service.
The phone expects the callback call to use the same data call settings
that were used in the callback-requesting call. The network must
support that type of call in both directions, to and from the phone.
Callback type — The options are Use server no. and Use other no..
Callback number — to enter your phone number which the dial-back
server uses.
Use PPP compress. — To speed up data transfer, select Yes if supported
by the remote PPP server.
Use login script > Yes — to use a login script when establishing the
connection
Login script —to insert the login script
Modem initialisation (modem initialization string) — to control your
phone using modem AT commands. If required, enter commands
specified by your service provider or Internet service provider.
Packet data
The packet data settings affect all access points using a packet data
connection.
Select Menu > Tools > Settings > Connection > Packet data and from
the following options:
Packet data conn. — If you select When available and you are in a
network that supports packet data, the phone registers to the GPRS
network and short messages are sent using GPRS. Also, starting an
active packet data connection, for example, to send and receive e-mail,
is quicker. If you select When needed, the phone uses a packet data
connection only if you start an application or function that needs it. The