Filter
Top Products
12
■ Charge the battery
Connect the charger to a wall socket. Connect
the charger to the device.
If the battery is completely discharged, it may
take a few minutes before the charging
indicator appears on the display or before any
calls can be made.
The charging time depends on the charger and
the battery used. Charging a BP-5M battery
with the AC-4 charger takes approximately
80 minutes.
■ Switch the device on or off
Press and hold the end key.
If the device asks for a PIN code, open the slide, enter the PIN
code, and select OK.
If the device asks for the lock code, enter the lock code, and
select OK. The factory setting for the lock code is 12345.
■ Set time and date
To set the correct time zone, time, and date, select the country you are in, and
enter the local time and date.
■ Normal operating position
Use the device only in its normal operating position.
During extended operation, such as an active video call or high
speed data connection, the device may feel warm. In most cases,
this condition is normal. If you suspect the device is not working
properly, take it to the nearest authorized service facility.