Filter
Top Products
26
and save them in your phone. If you know a recipient’s SIP address, you can
enter it on your contact card for that person, select Menu > Contacts, a
contact, and Options > Edit > Options > Add detail > Share view. Enter the SIP
address in the format sip:username@domainname (you can use an IP address
instead of a domain name).
• Ensure you have an active UMTS connection and are within UMTS network
coverage. If you start the sharing session while you are within UMTS network
coverage and a handover to GSM occurs, the sharing session is discontinued,
but your voice call continues.
• Ensure that both the sender and recipient are registered to the UMTS network.
If you invite someone to a sharing session and that person’s device is turned
off, or the person is not within UMTS network coverage, they do not know that
you are sending an invitation. However, you receive an error message that the
recipient cannot accept the invitation.
Share video
To receive a sharing session, the recipient must install Video sharing and configure
the required settings on their mobile device. You and the recipient must both be
registered to the service before you can start sharing.
Live video
1. When a voice call is active, select Options > Share video > Live video.
2. The device sends the invitation to the SIP address you have added to the
contact card of the recipient.
If the recipient has several SIP addresses in the contact card, select the SIP
address to which you want to send the invitation, and Select to send the
invitation.
If the SIP address of the recipient is not available, enter a SIP address. Select
OK to send the invitation.
3. Sharing begins automatically when the recipient accepts the invitation.
The loudspeaker is active. You can also use a headset to continue your voice
call while you share live video.
4. Select Pause to pause the sharing session. Select Continue to resume sharing.
5. To end the sharing session, select Stop. To end the voice call, press the end key.