Filter
Top Products
79
Cell info display (network service) — To set the device to indicate when it is used in
a cellular network based on microcellular network (MCN) technology and to
activate cell info reception, select On.
Connection
Select Menu > Settings > Phone sett. > Connection > Bluetooth, USB, Access
points, Packet data, Data call, SIP settings, Configurations, or APN control .
Bluetooth
Switch Bluetooth on or off, and edit Bluetooth settings. See "Bluetooth
connection," p. 85.
USB
Edit USB settings. See "USB data cable," p. 87.
Access points
To establish a data connection, an access point is required. You can define
different kinds of access points:
• MMS access point to send and receive multimedia messages
• WAP access point to view web pages
• Internet access point (IAP) (for example, to send and receive e-mail)
Check which kind of access point you need with your service provider for the
service you wish to access. For availability and subscription to data connection
services, contact your service provider.
You may receive access point settings in a message from your service provider, or
you may have preset access point settings in your device.
To create a new access point or edit an existing access point, select Options >
New access point or Edit. To create a new access point using the settings of an
existing access point, scroll to an access point, and select Options > Duplicate
access point.
Depending on the connection type selected in Data bearer, only certain settings
are available. Fill in all fields marked with Must be defined or with an asterisk.
Contact your service provider for the following settings: Data bearer, Access point
name (for packet data only), Dial-up number (for data call only), User name,
Password, Authentication, Homepage, Data call type (for data call only), and
Maximum data speed (for data call only).
Connection name — Enter a descriptive name for the connection.