Filter
Top Products
[ 63 ]
Customize your phone
10
Note:
If the loopset is enabled, you’ll be asked to disable the
loopset before enabling TTY/TDD. Press
Yes
to disable the loopset
(thus enabling TTY/TDD). Press
No
to leave the loopset enabled.
Connect TTY hardware
1
The TTY device comes
with a cable. Plug the
larger end of this
cable into the input
jack on the TTY.
2
Plug the other end of
the cable into the TTY
adapter HDA-8.
3
Plug the HDA-8 into
the connector on the
bottom of your phone.
Make a call with TTY
Note:
You must have a an accessory attached to your phone prior
to selecting the accessory settings menu.
1
At the Start screen, press
Menu 4-6-4-1-1
(Settings - Accessory
settings - TTY/TDD - Use TTY - Yes). After a brief pause, a confirmation
message appears in the display.
Note:
After selecting
Yes
, this becomes the default and you won’t
have to do it again unless you turn TTY/TDD off.
2
Press
to return to the Start screen.
3
Enter the number you wish to call (on the phone) and press .
4
When the receiving party answers, begin typing your conversation on
the TTY.
End a TTY call
• Press on the phone