Filter
Top Products
10
[ 64 ]
Receive a TTY call
1
Make sure the TTY and phone are connected.
2
When the phone vibrates (if vibrate is on), press
to answer the
call, and then type your response on the TTY.
3
To hang up, press on the phone.
• OPTIONAL HEADSETS
The HDC-9P and HDE-1 headsets can be purchased separately as accessories.
Connect the headset
1
Plug the headset jack into the accessory
connection on the bottom end of your phone.
2
Place the round headset ear plug in your ear.
With the headset connected, you can make,
answer, and end calls as usual.
• Use the keypad to enter numbers
• Press to place a call
• Press to end a call
When in use, the headset microphone hangs at
the side of your head. Although it may seem far
from your mouth, you can speak at normal volume.
VOICE DIAL A NUMBER WITH THE HDC-9P HEADSET
Once you’ve voice tagged entries in your Phone book, you can make a call
with the HDC-9P headset by simply pressing and holding the remote button
on the microphone. See “Assign a voice tag” on page 51 for information
on setting up voice tags if you haven’t already.
1
At the Start screen, press and hold the remote button on the headset.
Your phone beeps and
Please speak now
appears in the display.
2
Within 3 seconds, pronounce the voice tag into the microphone.
Once the voice tag is recognized, the tagged entry appears in the
display, replays through the earpiece, and the number is dialed.