Filter
Top Products
Getting Your Device Connected and Synchronized
99 Copyright ©2006 Nokia All right reserved
14. Click Connect using a dial-up modem and then Next.
15. In the dialog that follows, click to choose Modem - Nokia
6708 VSC Modem (WDM) and then click Next.
16. In the dialog that follows, enter a connection name in the
ISP name box, and then click Next.
17. Enter *99# in Phone number box in the dialog that follows
and then click Next.
18. Enter the user name and password in the dialog that follows
and then click Next.
Note: Consult your network service provider for the
user name and password if required.
19. Click Finish, and then click Properties in the Connect Dial-up
Connection dialog that follows.
20. Click Configure, uncheck Enable hardware flow control and
then click OK.
21. Click OK to return to the Connect Dial-up Connection dialog.
Now you can click Dial to start using the device as a GPRS
modem to connect to the Internet.
Setting up GPRS Modem via Bluetooth
Connection
1. Perform step 1 through 7 in "Establishing Bluetooth
Connection" on page 96 to establish Bluetooth connection.
2. On your PC, click the Start button on Windows Taskbar,
right-click on My Computer and select Properties.
3. Click the Hardware tab and then click Device Manager.
4. Double-click Modems, and then Bluetooth Modem.
5. In the dialog that appears, click the Advanced tab.
6. Refer to the service provider’s setting to enter a command in
the Extra initialization commands box, and then click OK. An
example of the command is
+cgdcont=1,"ip", "APN"
Note: APN (Access Point Node) is a setting by your
network service provider that tells how your data requests
should be routed. Consult your network service provider for
the actual APN address.
7. Double-click the My Bluetooth Places icon on the Desktop
and select View devices in range. The Nokia 6708 icon (or the
name referred to your device) will appear.
8. Double-click the Nokia 6708 icon and all available services
will appear.
9. Double-click the Dial-up Networking on Nokia 6708 service
icon.
10. Click Properties in the Connect Bluetooth Connection dialog
that follows.
11. Click Configure, uncheck Enable hardware flow control and
then click OK.