Filter
Top Products
Using the Application Programs
Copyright ©2006 Nokia All right reserved 60
Note: When calls are restricted, calls still may be
possible to the official emergency number programmed into
your device.
1. After Restrict calls is selected, the device will inquire the
status of your current setting. This will take a few seconds.
2. According to the call type you want to setup, tap the
Incoming or Outgoing tab.
3. Tap to select a restriction condition (for example, All
incoming: or Incoming when roaming:) and then select from
the following options:
• On: Enable call restriction.
• Off: Disable call restriction.
4. Tap the Done button. You will be asked to enter the restrict
code. Enter the code and tap the Done button.
5. To change the restrict code, tap the Change password
button.
Note: Call restricting and call diverting cannot be
active at the same time.
Voice Mail
You must enter the voice mail-box number here before you can
access your voice mail. The voice mail-box number is available
from your network service provider.
Enter your voice mail-box number and then tap the Done button.
Camera
Note: The Nokia 6708 device supports an image capture
resolution of 1280 x 1024 pixels. The image resolution in
these materials may appear different.
With the built-in camera and the Camera application program,
you can take still pictures, capture video clips for viewing on the
device or sharing them with your friends or family by sending
them via MMS messages or transferring them to PC.
Taking Still Pictures
1. Press and hold the Camera key for about 2 seconds. The
Camera application program will open automatically.
2. Preview the image using the viewfinder. You can also tap the
+ (or press the key) or - button on the screen
(or press the key) to zoom in or out on the object.
3. (Optional) Tap the button to set your desired Camera
settings.
4. (Optional) Tap the button (or press the key) to
increase, or tap the button (or press the key) to
decrease exposure value according to ambient lighting
condition.
5. Press the Camera key and the still image will be captured
and saved.