Filter
Top Products
Using the Application Programs
Copyright ©2006 Nokia All right reserved 58
Note: The PIN2 is the second PIN code. Its main use is
in controlling restricted services. For example, call time
limits and restricted phone numbers.
• If the PIN2 code is incorrectly entered three times
consecutively, it will be locked. To unlock it, you will need to
enter the PUK2 code, which you obtain from your network
operator.
• When no more charging units or currency units are left, calls
may only be possible to the official emergency number
programmed into the device.
If the Credit status is set to Limited and there is only 30 seconds
of credit left, the message "Low credit" will appear on the screen.
If “Credit expired” appears, you can not make any chargeable
calls.
Note: For the availability and more information about
the Call meter function, please consult your network service
provider.
Call Waiting
If there is an incoming call when you are in the middle of another
call and the call waiting function is enabled, the screen will
display the number (if available) of the incoming call and call
waiting message to alert you.
1. After Call waiting is selected, the device will inquire the
status of your call waiting setting. This will take a few
seconds.
2. Select from the following options:
• On: Enable call waiting.
• Off: Disable call waiting.
3. Tap Done to exit.
Calling Cards
You can use this option to set up the device for use with your
calling cards.
1. Tap the New button to add a new calling card.
2. Enter necessary information and then tap the Done button.
3. Tap Calling card mode to select from Off, Prompt before call
or Always use calling card. If you have multiple calling cards,
select one from the Calling cards box first.
4. Tap the Done button.
To delete a calling card, tap to select one in the Calling cards box
and then tap the Delete button.
To edit a calling card, tap to select one in the Calling cards box
and then tap the Edit button.
Connection alert
When the connection alert function is activated, you will be
informed when a successful phone connection is made.
1. Select from the Select connection alert drop-down list. The
available options are Off, Vibrate, Ring, and Flash.
2. Tap Done.