Filter
Top Products
32
Positioning
select Current position. To enter the position information manually, select
Enter manually.
To add a landmark to preset categories, select the landmark, and Options > Add to
category. Select the categories to which you want to add the landmark.
To send one or several landmarks to a compatible device, select Options > Send.
Your received landmarks are placed in Inbox in Messaging.
■ GPS data
GPS data is designed to provide route guidance information to a selected
destination, position information about your location, and travelling information,
such as the approximate distance and travel time to the destination.
Route guidance
Start the route guidance outdoors. Select > Applications > GPS data >
Navigation.
Route guidance shows the straightest route and the shortest distance to the
destination, measured in a straight line. Any obstacles on the route, such as
buildings and natural obstacles, are ignored. Differences in altitude are not taken
into account when calculating the distance. Route guidance is active only when
you move.
To set your trip destination, select Options > Set destination and a landmark as
the destination, or enter the latitude and longitude coordinates. To clear the
destination, select Stop navigation.
Position
To save your location as a landmark, select > Applications > GPS data >
Position > Options > Save position.
Trip meter
To activate trip distance calculation, select > Applications > GPS data > Trip
distance > Options > Start. To deactivate it, select Options > Stop. The calculated
values remain on the display.
To set the trip distance and time and average and maximum speeds to zero, and to
start a new calculation, select Reset. To set the odometer and total time to zero,
select Restart.
The trip meter has limited accuracy, and rounding errors may occur. Accuracy can also be
affected by availability and quality of GPS signals.