Nokia C5-03 Cell Phone User Manual


 
Settings
Your device normally has MMS, GPRS, streaming, and mobile internet settings
automatically configured in the device, based on your network service provider
information. You may have settings from your service providers already installed in your
device, or you may receive or request the settings from the network service providers
as a special message.
Access codes
PIN code — Protect your device and SIM card against unauthorized use. The PIN code
(4 - 8 digits) is usually supplied with the SIM card.
PIN2 code — This code (4 - 8 digits) is supplied with some SIM cards, and is required to
access some functions in your device.
If you forget an access code, contact the network service provider whose SIM card is in
your device. After three consecutive incorrect PIN or PIN2 code entries, the code is
blocked, and you need the PUK or PUK2 code to unblock it.
PUK code and PUK2 code — These codes (8 digits) are required to change a blocked PIN
code or PIN2 code, respectively. If the codes are not supplied with the SIM card, contact
the network service provider whose SIM card is in your device.
IMEI number — This number (15 digits) is used to identify valid devices in the GSM
network. Devices that are, for example, stolen, can be blocked from accessing the
network. The IMEI number for your device can be found under the battery.
Lock code (also known as security code) — The lock code helps you to protect your device
against unauthorized use. You can create and change the code, and set the device to
request the code. Keep the new code secret and in a safe place separate from your
device. If you forget the code and your device is locked, your device will require service
and additional charges may apply. Additional charges may apply, and all the personal
data in your device may be deleted. For more information, contact a Nokia Care Point
or your device dealer.
Prolong battery life
Many features in your device increase the demand on battery power and reduce the
battery lifetime. To save battery power, note the following:
Features that use Bluetooth connectivity, or allowing such features to run in the
background while using other features, increase the demand on battery power.
Deactivate Bluetooth connectivity when you do not need it.
Features that use Wi-Fi, or allowing such features to run in the background while
using other features, increase the demand on battery power. Wi-Fi connectivity is
deactivated when you are not trying to connect, not connected to an access point,
or not scanning for available networks. To further reduce battery consumption, you
8Find help