Filter
Top Products
Settings
107
Access points
You may receive access point settings in a message from a
service provider. See ‘Data and settings’, p. 79. Some or all
access points may be preset for your device by your service
provider, and you may not be able to change, create, edit,
or remove them. indicates a protected access point, and
indicates a packet data access point.
To create a new access point, select Options > New access
point. Select Use default settings to use the default
access point settings or Use existing settings to select an
existing access point as the basis for the new access point.
To edit the settings of an access point, select Options >
Edit. Follow the instructions from your service provider.
Connection name—Enter a descriptive name for the
connection.
Data bearer—Select the data connection type.
Depending on the data connection you select, only certain
setting fields are available. Fill in all fields marked with
Must be defined or with a red asterisk. Other fields can be
left empty, unless you have been instructed otherwise by
your service provider.
To be able to use a data connection, the network service
provider must support this feature, and if necessary,
activate it for your SIM card.
Packet data
Follow the instructions from your service provider.
Access point name—You obtain the access point name
from your service provider.
User name—The user name may be needed to make a data
connection, and is usually provided by the service
provider.
Prompt password—If you must enter the password every
time you log in to a server or if you do not want to save
your password in the device, select Yes.
Password—A password may be needed to make a data
connection and is usually provided by the service provider.
Authentication—Select Normal or Secure.
Homepage—Depending on the access point you are
setting up, enter the web address or the address of the
multimedia messaging center.
Select Options > Advanced settings to change the
following settings:
Network type—Select the internet protocol type to use:
IPv4 or IPv6. The other settings depend on the selected
network type.
Phone IP address (for IPv4 only)—Enter the IP address of
your device.