Camera
30
To rename the video, select Options > Rename video.
Camera settings
There are two kinds of settings for the camera: setup
settings and main settings. To adjust image or video setup
settings, see ‘Setup settings—adjust color and lighting’,
p. 30. To change the main settings, see ‘Still image camera
settings’, p. 30, or ‘Video settings’, p. 31.
The setup settings return to the default settings after you
close the camera, but the main settings remain the same
until you change them again.
Setup settings—adjust color and
lighting
To enable the camera to reproduce colors and lighting
more accurately, or to add effects to your pictures or
videos, use the scroll key to scroll through the active
toolbar, and select from the following options:
White balance—Select the current lighting condition
from the list. This allows the camera to reproduce colors
more accurately.
Exposure compensation (images only)—Adjust the
exposure time of the camera.
Colour tone—Select a color effect from the list.
The screen display changes to match any settings you
make, so that you see how the change affects the pictures
or videos.
The available settings vary depending on the selected
camera.
The setup settings affect both the cameras; if you change
the settings in the secondary camera, the settings in the
main camera change too. The setup settings return to the
default settings when you close the camera.
If you select a new scene, the color and lighting settings
are replaced by the selected scene. See ‘Scenes’, p. 28. You
can change the setup settings after selecting a scene if
needed.
Still image camera settings
To change the still image camera main settings, select
Options > Settings and from the following:
Image quality—Print 2M - Large (1600x1200 resolution),
Print 1M - Medium (1152x864 resolution), or MMS
0.3M - Small (640x480 resolution). The better the image
quality, the more memory the image consumes. If you
want to print the image, select Print 2M - Large or Print
1M - Medium. If you want to send it through e-mail,
select Print 1M - Medium. To send the image through
MMS, select MMS 0.3M - Small.