Filter
Top Products
Tip: Selecting UMTS enables faster data transfer, but may increase the demand on
battery power and reduce the battery life. In regions close to both GSM and UMTS
networks, selecting Dual mode may cause constant jumping between the two
networks, which also increases the demand on battery power.
To select the operator, select Operator selection and Manual to select from
available networks, or Automatic to set the device to select the network
automatically.
To set the device to indicate when it is used in a microcellular network (MCN), select
Cell info display > On.
Connection settings
Select Menu > Ctrl. panel > Settings and Connection.
Select from the following:
Bluetooth — Edit the Bluetooth settings.
USB — Edit the data cable settings.
Destinations — Set up new or edit existing access points. Some or all access points
may be preset for your device by your service provider, and you may not be able to
create, edit or remove them.
VPN — Manage the settings for virtual private networking.
Packet data — Define when packet data network is attached, and enter the default
packet switched access point name if you use your device as a modem for a
computer.
Wireless LAN — Set the device to display an indicator when a wireless LAN (WLAN)
is available, and define how often the device searches for networks.
Video sharing — Enable video sharing, select the SIP profile for video sharing, and
define the video saving settings.
SIP settings — View or create session initiation protocol (SIP) profiles.
Settings 183