Filter
Top Products
Advanced WLAN settings
Select Options > Advanced settings. The advanced WLAN settings are normally
defined automatically, and changing them is not recommended.
To edit the settings manually, select Automatic configuration > Disabledand
define the following:
Long retry limit — Enter the maximum number of transmission attempts if the
device does not receive a receiving acknowledgement signal from the network.
Short retry limit — Enter the maximum number of transmission attempts if the
device does not receive a clear-to-send signal from the network.
RTS threshold — Select the data packet size at which the WLAN access point device
issues a request to send before sending the packet.
TX power level — Select the power level of your device when sending data.
Radio measurements — Enable or disable the radio measurements.
Power saving — Select whether to use the WLAN power saving mechanism to save
the power in the device battery. Using the power saving mechanism enhances the
battery performance but may weaken WLAN interoperability.
To restore all settings to their original values, select Options > Restore defaults.
WLAN security settings
Select Menu > Ctrl. panel > Settings and Connection > Destinations > Access
point, and follow the instructions on the display.
To edit a wireless LAN (WLAN) access point, open one of the access point groups,
and select an access point marked with
.
To enter the settings for the selected security mode, select WLAN security
settings.
190 Settings