Filter
Top Products
multiple data connections active at the same time; access points can share a data
connection, and data connections remain active, for example, during voice calls.
To define the packet data settings, select Packet data connection and When
available to register the device to the packet data network when you switch the
device on in a supported network, or When needed to register the device to a
packet data network only when an application or action attempts to establish a
packet data connection. This setting affects all access points for packet data
connections.
To use the device as a packet data modem for your computer, select Access
point, and enter the access point name provided by your service provider.
WLAN settings
Select Menu > Ctrl. panel > Settings and Connection > Wireless LAN.
To have an indicator displayed when there is a wireless LAN (WLAN) available in
your current location, select Show WLAN availability > Yes.
To select the interval for your device to scan for available WLANs, and to update the
indicator, select Scan for networks. This setting is not available unless you select
Show WLAN availability > Yes.
To set the device to test the internet capability of the selected WLAN automatically,
to ask for permission every time, or to never perform the connectivity test, select
Internet connectivity test > Run automatically, Ask every time, or Never
run. If you select Run automatically or allow the test to be performed when the
device asks for it, and the connectivity test is performed successfully, the access
point is saved to internet destinations.
To check the unique media access control (MAC) address that identifies your device,
enter *#62209526# in the home screen. The MAC address is displayed.
Settings 189