Filter
Top Products
In the ad hoc operating mode, devices can send and receive data directly with each
other.
WLAN settings
Select Menu > Ctrl. panel > Settings and Connection > Wireless LAN.
To have an indicator displayed when there is a wireless LAN (WLAN) available in
your current location, select Show WLAN availability > Yes.
To select the interval for your device to scan for available WLANs, and to update the
indicator, select Scan for networks. This setting is not available unless you select
Show WLAN availability > Yes.
To set the device to test the internet capability of the selected WLAN automatically,
to ask for permission every time, or to never perform the connectivity test, select
Internet connectivity test > Run automatically, Ask every time, or Never
run. If you select Run automatically or allow the test to be performed when the
device asks for it, and the connectivity test is performed successfully, the access
point is saved to internet destinations.
To check the unique media access control (MAC) address that identifies your device,
enter *#62209526# in the home screen. The MAC address is displayed.
Active data connections
Select Menu > Ctrl. panel > Connectivity > Conn. mgr..
Select Active data connections.
In the active data connections view, you can see the open data connections:
data calls
packet data connections
wireless LAN (WLAN) connections
Connectivity 79