Filter
Top Products
First start-up
1. Press and hold the power key.
2. If the device asks for a PIN code or lock code, enter the code, and select OK.
3. When prompted, enter the current date, time, and the city in which you are located. To switch the time between a.m. and
p.m., scroll up or down. To find your city, enter the first letters of the city name. It is important to select the correct city,
because scheduled calendar entries may change if you change the city later and the new city is located on a different time
zone.
Tip: When you switch the device on, it may recognize the SIM card provider and configure the correct text message,
multimedia message, and GPRS settings automatically. If not, contact your service provider for the correct settings, or
use the Settings wizard application.
When you switch the device off, the communicator part also switches off. To switch off the communications functions and use
the communicator part only, press the power key briefly, and select Offline. The Offline profile prevents your device from
accidentally switching on, sending or receiving messages, or using wireless LAN, Bluetooth, GPS, or FM radio; it also closes any
internet connection that may be in operation when the profile is selected. The Offline profile does not prevent you from
establishing a wireless LAN or Bluetooth connection at a later time, or from restarting the GPS or FM radio, so comply with any
applicable safety requirements when establishing and using these features.
About the display
A small number of missing, discolored, or bright dots may appear on the screen. This is a characteristic of this type of display.
Some displays may contain pixels or dots that remain on or off. This is normal, not a fault.
Display indicators
The device is being used in a GSM network. The bar next to the icon indicates the signal strength of the network at your
current location. The higher the bar, the stronger the signal.
The battery charge level. The higher the bar, the stronger the charge in the battery.
You have one or more unread messages in the Inbox folder in Messaging.
You have received new e-mail in the remote mailbox.
You have one or more missed phone calls.
An alarm is active.
You have selected the Silent profile, and the device does not ring for an incoming call or message.
Bluetooth is active.
An infrared connection is active. If the indicator blinks, your device is trying to connect to the other device, or the connection
has been lost.
A GPRS packet data connection is available.
A GPRS packet data connection is active.
A GPRS packet data connection is on hold.
An EGPRS packet data connection is available.
An EGPRS connection is active.
An EGPRS packet data connection is on hold.
You have set the device to scan for wireless LANs, and a wireless LAN is available.
A wireless LAN connection is active in a network that does not have encryption.
A wireless LAN connection is active in a network that has encryption.
Your device is connected to a UMTS network.
Your device is connected to a computer with a USB data cable.
and Indicate the phone line that you have selected, if you have subscribed to two phone lines (network service).
G e t s t a r t e d
© 2007 Nokia. All rights reserved. 13