Menu functions
101
Copyright
© 2003 Nokia. All rights reserved.
Select each of the following service settings one by one and key in all the
required settings.
• Settings' name - Key in the new name for the connection set and press OK.
• Homepage - Key in the homepage address of the WAP service that you
want to use, press for a dot, and press OK.
• Session mode - Select Permanent or Temporary.
• Connection security - Select On or Off.
When the connection security is On, the phone tries to use a secure
connection with the WAP service. If a secure connection is not available,
the connection will not be made. If you wish to connect anyway, with a
non-secure connection, you must set the connection security to Off.
• Data bearer - Select GSM data or GPRS. Settings for the selected bearer, see
Settings when GSM data is the selected data bearer and Settings when
GPRS is the selected data bearer below.
For pricing, connection speed and other information, contact your network
operator or service provider.
Settings when GSM data is the selected data bearer
• Dial-up number - Key in the phone number and press OK.
• IP address - Key in the address, press for a dot, and press OK. You obtain the
IP address from your network operator or service provider.
• Authentication type - Select Secure or Normal.
• Data call type - Select Analogue or ISDN.
