Filter
Top Products
[ 71 ]
Menu functions
•Press
Listen
if there is a notification message in the display.
•Press
Menu
0-1-4-1
(
Messages
>
Voice
messages
>
Listen
to
voice
messages
). After a brief pause, your phone dials the
voicemail number.
Once you connect and the prerecorded greeting begins, follow the
automated instructions to listen to your voice messages.
• AUTOMATE VOICEMAIL
You can insert special characters called dialing codes into phone numbers
such as voicemail and then save the number to a 1-touch dialing location.
Dialing codes instruct the receiving system to pause, wait, bypass, or
accept the numbers that follow them in the dialing string.
Note:
Each voicemail service can vary. The examples and steps
that follow are for clarification. Check with your wireless provider
if you have specific questions about your voicemail service.
Write down some information
1
Write down your voice mailbox number.
2
Call and check your voicemail as you normally would.
3
Write down your interaction with the recorded prompts step-by-step.
Keep in mind that each voicemail service may vary. However, it should
look something like this:
Dial 2145551212, pause 5 seconds, press 1, pause 2 seconds, press
1234, press pound key.
Important:
Be precise. You will need this information in “Setup
voicemail with dialing codes” on page 72 later in this section.
INSERT DIALING CODES
Press the star key repeatedly to cycle through dialing codes. Once the
desired code appears in the display, pause briefly and the code is inserted
into the dialing string.