Menu functions
73
Copyright
© 2003 Nokia. All rights reserved.
Tone settings
Press Menu, and select Settings and then Tone settings. You can find the same
settings in the Profiles menu, see Profiles (Menu 3) on page 63. Note that the
settings you make, change the settings in the active profile.
• Select Incoming call alert to select how the phone notifies you of an incoming
voice call. The options are Ringing, Ascending, Ring once, Beep once and Off.
• Select Ringing tone for incoming voice calls. To select ringing tones that have
been saved in the Gallery, select Open gallery from the ringing tone list.
• Select Ringing volume and Vibrating alert for incoming voice calls and
messages. The vibrating alert does not work when the phone is connected to a
charger, a desktop stand, or a car kit.
Tip: If you receive a ringing tone via infrared connection or by
downloading, you can save the ringing tone in the Gallery.
• Select Light alert to set the phone to flash the integrated flashlight during an
arriving call.
Note: If you have switched the flashlight on before the incoming call, the
flashlight will not flash.
• Select Message alert tone to set the alert tone for the incoming messages,
Keypad tones, or Warning tones to set the phone to sound tones for example,
when the battery is running out of power.
• Select Alert for to set the phone to ring only upon calls from phone numbers
that belong to a selected caller group. Scroll to the caller group you want or All
calls and press Mark.
