Filter
Top Products
©2000 Nokia Mobile Phones. All rights reserved.
Menu functions
110
to send Task journal data to another phone via infrared, though. You can not receive Task journal data
from a PC.
Note: Your phone must be switched on to use this function. Do not switch on the phone
when the use of a wireless phone is prohibited or when it may cause interference or danger.
To send and receive data via IR
1. Ensure that the IR ports of the sending and receiving devices are pointing at each other and that
there are no obstructions between the devices. The preferable distance between the two devices in
an infrared connection is one meter at most.
2. When receiving data via IR, activate the IR port of your phone by entering the Infrared menu (Menu
12).
3. The user of the sending phone selects the desired IR function to start data transfer.
If data transfer is not started within two minutes of activation of the IR port, the connection is
cancelled and has to be started again.
Note: Your phone is a Class 1 Laser Product.
Checking the status of an IR connection
The status of an IR connection is indicated by .
When is shown continuously, the IR connection is activated and your phone is ready to send and
receive data via its IR port.
When is not shown, no IR connection exists.
When blinks, your phone is trying to connect to the other device or a connection has been lost.