Filter
Top Products
©2000 Nokia Mobile Phones. All rights reserved.
Menu functions
82
1. Select On if you want to select the automatic keypad lock.
2. Give the time entry in minutes and seconds after Delay time appears on the display.
The default is 01:00. The maximum time entry for the delay is 60 minutes and the minimum entry
10 seconds.
The automatic keyguard activates if:
• phone is in standby mode and a user selectable time delay expires.
Keylock code (Menu 4-3-2)
You can use keylock code to prevent the unauthorised use of your phone. The default code is 0000.
Note: Before activating the keylock code make sure that the PIN code request is also set on.
If you set the keylock code by pressing On this is confirmed with the note Keylock code activated. You
need to enter the required code in the standby mode to unlock the keypad.
Note: To unlock your keypad, press in standby mode Unlock and then key in the four-digit keylock
code. If you enter an incorrect keylock code five times in succession, the phone prompts you to enter
the PIN code instead. After entering the PIN code, you can change your keylock code (Menu 4-3-3).
Change keylock code (Menu 4-3-3)
If you want to change the old or default code to a new one, use this
submenu.
1. Enter the new four-digit keylock code and press OK.
2. Verify the given code.
Note: Despite the keylock code you can answer a call and use other keys as
usual during the call. The keypad lock is reactivated once the call is finished.