Filter
Top Products
Nokia 6670 User Guide 79 Copyright © 2005 Nokia
Tools and applications
• VOICE COMMANDS
Select Menu > Tools > Voice com..
Options in Voice commands are Add voice command, Open,
New application, Playback, Change, Delete, Delete all, Help,
and Exit.
You can use voice commands to start applications and profiles, and to dial
numbers from Contacts, without having to look at the phone display. You
record a word, or words, (voice command) and then say this voice command to
open an application, activate a profile, or dial a number.
You can have only one voice command per item. Any spoken words can be a
voice command.
When recording, hold the phone at a short distance away from your mouth.
After the starting tone, say clearly the word, or words, you want to record as a
voice command.
Voice commands have the same requirements as voice tags. Before recording a
voice command, see “Requirements for voice tags” on page 33.
Note: You must say the voice command exactly as you said it when you
recorded it. This may be difficult in, for example, a noisy environment or
during an emergency, so you should not rely solely upon voice commands
in all circumstances.
Add a voice command to an application
1 In Voice commands, scroll to the application to which you are adding a
voice command, and select Options > Add voice command. To add a voice
command to a profile, you must have the Profiles folder open and a specific
profile selected.
Press ’Start’, then speak after tone is displayed.
2 Press Start to record a voice command.
The phone sounds a starting tone, and the note Speak now is displayed.
3 Say the voice command.
The phone will stop recording after approximately 5 seconds. After recording,
the phone plays the recorded command. Voice command saved is displayed,
and a beep sounds. A symbol can be seen next to the application.
If you do not want to save the recording, press Quit before the recording stops.