Filter
Top Products
42
Copyright © 2004 Nokia. All rights reserved.
• Silent mutes all ringing tones
• Meeting quiet beep
• Outdoor loud ringing tone
• Pager silent, flashes lights and
the number of the caller
• Headset
1
• Car
2
2. To customise the profiles, scroll to
the desired profile , for example
General, and press Options.
3. Select Personalise and press OK.
• If you select Activate, the select-
ed profile is only set on. The pro-
file cannot be customised.
NOTE: When the phone is con-
nected to the car kit PPH-1 or
headset HDC-5, the Activate func-
tion is not available.
4. Scroll to the desired setting, for
example Ringing tone, and press
Select.
5. While in the list of ringing tones,
scroll to the desired option and
press OK.
Tone settings for
profiles
Incoming call alert
This setting defines how the phone
will notify you about an incoming
voice call. The options available are:
Ringing, Ascending, Ring once, Beep
Once, Caller Groups and Off.
Caller groups
The phone will ring only when calls
are received from phone numbers
which belong to the selected caller
group. (Also a graphic is shown, if
specified to the group.)
Scroll to the desired group and press
Mark to select or Unmark to deselect
it. Repeat this as many times as nec-
essary. Next, press Back and then Yes
to save or No to discard the changes.
See also ‘Phone book‘, ‘Caller groups’.
Ringing tone
Sets the ringing tone for voice calls.
Ringing volume
Sets the volume level for the ringing
and message alert tones.
1
Headset
will not appear in the Profiles list unless headset HDC-5 is connected to your
phone. However, the settings for the
Headset
will remain in the menu once connected.
2
Car will not appear in the Profiles list unless car kit PPH-1 is connected to your phone.
However, the settings for the
Car will remain in the menu once connected.