Make calls
53
Copyright © 2006 Nokia. All rights reserved.
turned off, or that person is not within UMTS network
coverage, they do not know that you are sending an
invitation. However, you receive an error message that
the recipient cannot accept the invitation.
Settings
Person-to-person connection settings
A person-to-person connection is also known as a session
initiation protocol (SIP) connection. The SIP profile settings
must be configured in your device before you can use
Video sharing. Setting up a SIP profile allows you to
establish a live person-to-person connection to another
compatible device. The SIP profile must also be established
to receive a sharing session.
Ask your network operator or service provider for the SIP
profile settings, and save them in your device. Your
network operator or service provider may send you the
settings over the air.
If you know a recipient’s SIP address, you can enter it on
your contact card for that person. Select Contacts from
the main menu, and open the contact card (or start a new
card for that person). Select Options > Add detail > Web
address. Enter the SIP address in the following format:
sip:username@domainname (you can use an IP address
instead of a domain name).
UMTS connection settings
To set up your UMTS connection, do the following:
• Contact your service provider to establish an
agreement for you to use the UMTS network.
• Ensure that your device UMTS access point connection
settings are configured properly. For help, see
‘Connection’, p. 90.
Share video
To receive a sharing session, the recipient must install
Video sharing and configure the required settings on their
mobile device. You and the recipient must both be
registered to the service before you can start sharing.
To receive share invitations, you must be registered to the
service, have an active UMTS connection, and be within
the UMTS network coverage.
Live video
1 When a voice call is active, select Options > Share
video > Live.
2 The device sends the invitation to the SIP address you
have added to the contact card of the recipient.
If the recipient has several SIP addresses in the contact
card, select the SIP address to which you want to send
the invitation, and Select to send the invitation.